You have found the perfect hardwood and now it is time to install. The installation method to use is mostly determined by the hardwood flooring selected. There are three main hardwood installation types – each with its own pros and cons to consider.
For a nail down installation, the flooring is affixed to the subfloor using nails or flooring cleats. Nail down installations cannot be done with a concrete subfloor – only with a wood subfloor. This installation method is popular for solid hardwood floors. It is not recommended for condos where noise from walking on hardwood is a concern as the noise will travel through the nails to the suite below. This method also allows us to finish flush to another floor so that you can avoid the use of transitions and have a beautiful seamless finish!
For this installation type, a speciality adhesive is spread with a trowel to glue the hardwood to the subfloor. Your flooring professional will recommend the best adhesive to use for your floor. This installation type is often used with engineered flooring or parquet. It is not recommended for solid hardwoods. This method also allows us to finish flush to another floor so that you can avoid the use of transitions and have a beautiful seamless finish!
As the name implies, floating hardwood is not attached to the subfloor. Instead the hardwood floats on top of the subfloor. Floating floor installations require an underpad to be placed on top of the subfloor before installation.
There are two types of floating installation: tongue & groove and click. For a floating tongue and groove installation, a recommended adhesive is applied to the tongue and groove of the floor board to hold the boards together. A click system on the other hand, doesn’t use adhesive. The manufacturer’s patented click system allows the boards to stay together.
If you are still unsure which hardwood installation type is most suitable for your hardwood, your flooring professional can advise you on the best installation method.